Nutshell - Schlage and Yale

Schlage Dana Front
Model #BE469ZP 13153884-675
SN 001E69A8
Firmware 0.11.0 07062021
programming code 484730
user code a - 7534

Schlage Dana Pool
Model #BE469ZP 13632449-213
SN: 10225E95 20137
Firmware 0.11.0 07202023
programming code: 417255
user code a - 4750 :
user code b - 2949
user code b - 7190

Schlage Zach
Model #BE469ZP 1382358-221
SN: 10237BAF 39397
Firmware 0.11.0 05072024
programming code: 463498
user code a - 3196
user code b - 9190

Schlage reset to factory default:
Unplug Batteries.
While pressing reset button, plug batteries back in

Programming Schlage:
1. Align the deadbolt correctly (left or right hand orientation)
2. Enter the master programming code (orange light)
3. Press "1" to enter a new code, or "2" to delete a code (default is 4 digits)
4. Enter the code youwant to have (green check)
5. Enter that code again (two green checks)
6. Repeat steps 4-5 to add or delete another code)

Yale QMC
Model YRD226
SN: BEVL6004438
Regustered to Zachary Schnitzer -
Purchased Amazon order no. 112-9889634-7279415 - 11/1/21 - $302.02
Master code - danas 6 digit pin

Yale Factory Reset:
1. Remove Batteries
2. Remove Cover and unscrew 3 retaining screws
3. Replace 3 batteries only
4. While holding the white reset button on the circuit board, replace the 4th battery
5. Continue to hold the white button for 10 seconds
6. Release the button and allow the unit iat least 5 seconds to respond
7. The unit will respond: "Welcome to Yale Real Living."
8. The unit is is now reset to factory default settings and ready to be programmed for a master pin
Programming Instructions:
The first time you use the keypad you will be prompted to create the master pin which is a number of you choosing

Setting the master pin:
The first time using the unit after a factory reset you will be required to crate a master pin
The unit will say "Welcome to Yale Real Living."
Eenter a 4 to 8 gigit pin code press the gear key to continue
Press the keypad for the handset to determing the correct handing of the deadbolt. (NOTE: You must actually press the 'Yale' Button
The unit will talk you through the remainder of the setup process.